CockneyRick Posted August 9, 2017 Posted August 9, 2017 (edited) Anybody got a pic of it? need to know how much fork sticks above yoke & where clip ons sit & mount on 54/56 forks? Edited August 9, 2017 by CockneyRick Quote
bernardo Posted August 15, 2017 Posted August 15, 2017 I ran my fork tops 10mm above the top yoke for racing and have them at 5mm now. Seems OK to me. The clip-ons mount flush with the bottom of the top yoke in standard position. Not at home for a few weeks so I can't post a pic Quote
fatblokeonbandit Posted August 15, 2017 Posted August 15, 2017 in standard from they are flush with the yoke Quote
bernardo Posted August 15, 2017 Posted August 15, 2017 Yes but I found the handling much improved by dropping them. Each to their own I suppose Quote
Madb Posted August 16, 2017 Posted August 16, 2017 standard fitting is 2mm showing above yoke if any help. set my mates up to show 5mm above yokes. handles sweet. thats 750 Quote
CockneyRick Posted August 16, 2017 Author Posted August 16, 2017 Tis going on the drag bike, so will prob look at 5-10mm as a start. Just needed a reference point. No need for pics now @bernardo Quote
Gixer34 Posted August 29, 2017 Posted August 29, 2017 If it's going on a drag bike I don't suposse it really matters does it? Quote
bernardo Posted August 29, 2017 Posted August 29, 2017 If you drop them too far you affect the trail which might make it unstable. Mind you a good steering damper would solve this. Don't forget about clearance between the wheel and rad Quote
CockneyRick Posted August 29, 2017 Author Posted August 29, 2017 12 hours ago, Gixer34 said: If it's going on a drag bike I don't suposse it really matters does it? As said, a reference point! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.