Carb bowl pressurise

[Tombola]

I'm steadily getting to the end of my build, If I have read correctly I need to pressurise the float bowls, could someone tell me if there is an easy way to pressurise the float bowls on my carbs please.

they are gsx1100f carbs 

[Gixer1460]

Hoping this is for a turbo build? Most use the float bowl vents for boost pressure lines.

[Tombola]

Yes mate, I can't find them, I'm hoping from the picture someone can show me which ole! 

[jameskat]

There is normally a "T" between each pair of carbs. All depends on what carbs you have got.  

[jameskat]

Sorry, didn't read all your first post. The hoses above blue circles should be float bowl vents.

[Tombola]

Cheers James, how did you tee into them??

[jameskat]

You don't tee into them, just come off the brass hose tails that the hoses above the blue circled area are connected to. I think I have read some where that you need to wire the rubber connections between carbs, but not too sure.