luke2152 Posted December 28, 2016 Share Posted December 28, 2016 Most the USD forks that are available are too short for the bandit. Anyone know who makes bespoke top yokes with a 40mm or so offset to more or less bolt them straight on and the cost (roughtly). Quote Link to comment
370steve Posted December 29, 2016 Share Posted December 29, 2016 you can always get some fork extenders made 1 Quote Link to comment
fatblokeonbandit Posted December 29, 2016 Share Posted December 29, 2016 (edited) Depends how cheap you are, I made this one years ago to stop the mudguard hitting the oil cooler with 750 slingy forks, chopped off the ends of one youke and had them welded to another gained 25mm, total cost was £13 plus a cake for the welder. I now have shorter Hayabusa forks so I had this made, it gains 50mm and is excellent, JJ machine works made it Lots of clearance clarence Edited December 29, 2016 by fatblokeonbandit 4 Quote Link to comment
Nutter. Posted January 5, 2017 Share Posted January 5, 2017 hi who made the fork extensions for you thanks 1 Quote Link to comment
370steve Posted January 5, 2017 Share Posted January 5, 2017 5 hours ago, Nutter. said: hi who made the fork extensions for you thanks friend of mine made them for me. Quote Link to comment
Nutter. Posted January 5, 2017 Share Posted January 5, 2017 (edited) i am interested in a set for a 1991 gsxr750m would he make a set ? if so what sort of money thanks dave Edited January 5, 2017 by Nutter. Quote Link to comment
Solcambs Posted January 6, 2017 Share Posted January 6, 2017 12 hours ago, 370steve said: I will ask Likewise I may be interested in a set for upside down TL1000S forks. Depending on cost obviously! 1 Quote Link to comment
370steve Posted January 9, 2017 Share Posted January 9, 2017 On 1/5/2017 at 9:10 PM, Nutter. said: i am interested in a set for a 1991 gsxr750m would he make a set ? if so what sort of money thanks dave On 1/6/2017 at 9:26 AM, Solcambs said: Likewise I may be interested in a set for upside down TL1000S forks. Depending on cost obviously! talked to Taff tonight for you both, unfortunately he has more on the go at the moment than he really wants, so he has said sorry but no to the request Quote Link to comment
Solcambs Posted January 10, 2017 Share Posted January 10, 2017 10 hours ago, 370steve said: talked to Taff tonight for you both, unfortunately he has more on the go at the moment than he really wants, so he has said sorry but no to the request Thanks for that ... never mind. If he gets quiet and all that :o) 1 Quote Link to comment
Nutter. Posted January 10, 2017 Share Posted January 10, 2017 12 hours ago, 370steve said: talked to Taff tonight for you both, unfortunately he has more on the go at the moment than he really wants, so he has said sorry but no to the request ok thanks for asking 1 Quote Link to comment
Rossco(Iceman Josros) Posted January 10, 2017 Share Posted January 10, 2017 17 hours ago, 370steve said: talked to Taff tonight for you both, unfortunately he has more on the go at the moment than he really wants, so he has said sorry but no to the request Would he share the drawing ?? 1 Quote Link to comment
370steve Posted January 10, 2017 Share Posted January 10, 2017 2 hours ago, Rossco(Iceman Josros) said: Would he share the drawing ?? I can ask Quote Link to comment
banditWP Posted January 19, 2017 Share Posted January 19, 2017 i put in a 750WP front end in my B6 with a 1000K7 shock with no discernable detriment to the handling, quite the opposite. simple stem swap and a couple of brackets to retain the B6 clocks, only pain, spacers for ignition barrel and fitting risers but if you know someone in the trade it's a few beer tokens Quote Link to comment
banditWP Posted January 19, 2017 Share Posted January 19, 2017 oops, need a B12 stem, B6 is welded in! Quote Link to comment
fatblokeonbandit Posted January 20, 2017 Share Posted January 20, 2017 12 hours ago, banditWP said: oops, need a B12 stem, B6 is welded in! Not necessarily, some welded some not, and some are 0.1mm smaller than others and need knurling.. 1 Quote Link to comment
Blue Posted January 20, 2017 Share Posted January 20, 2017 6 hours ago, fatblokeonbandit said: Not necessarily, some welded some not, and some are 0.1mm smaller than others and need knurling.. Yes I found that out too Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.