Big-Daddy Posted August 7, 2016 Posted August 7, 2016 I have some troble with my GSX 750 ET there i is no spark anymore, When i picked up the bike ther was no problem . but after the winter and with power on the accu its dead . Problem is one of the former owner have done a lot wirering work but he has used alot of yellow and blue wire. Have not tryed to fix it for month now because there is no head and tail in it . The starter runs fine and there is power on the accu. But those 2 conections to the coils ther is 2 wires in the one and onle one in the other and ther is a pice of wire in the connection Hope that someone can point me in the right way, before i paint it blue an and drop it into the sea Best Martin Quote
arnout Posted August 7, 2016 Posted August 7, 2016 7 hours ago, Big-Daddy said: .. But those 2 conections to the coils ther is 2 wires in the one and onle one in the other and ther is a pice of wire in the connection .. Well.. That should tell you enough.. Obviously with only having the one coil fully connected that would make sparks impossible.. The other coil should produce sparks though.. Check the wiring connections between parts with a multimeter and reinstall the missing coil wire.. Turn on ignition and check for power on one of the wires (normally orange +white tracer) of each coil.. Also.. Quote
jacktar01 Posted August 22, 2016 Posted August 22, 2016 If someone has had a go at wiring it is probably worth going through the whole ignition side, which is quite straight forward with the wiring diagram, signal generator to igniter to coils is not a lot of wires, print the circuit out and colour the to and from of the wires and meter them out. Spending the time to sort the basics out first can prevent hours of chasing later 1 Quote
Sheep Posted August 22, 2016 Posted August 22, 2016 I found a Haynes manual or Internet sourced wiring schematics very helpful.... 1 Quote
Big-Daddy Posted September 4, 2016 Author Posted September 4, 2016 Got a New wireing from the Bay was not easy to find ..but found the problem on the old wiering and got spark but still not starting Quote
Blubber Posted September 4, 2016 Posted September 4, 2016 As you are now getting sparks..... Next step-> fuel. Are the carbs getting fuel? 1 Quote
Joebloggs Posted September 4, 2016 Posted September 4, 2016 Squirt a bit of easy start in the airbox. 1 Quote
arnout Posted September 6, 2016 Posted September 6, 2016 If not fuel, wrong firing order perhaps? Got the caps on the correct plugs? (1-4 and 2-3) 1 Quote
Big-Daddy Posted September 12, 2016 Author Posted September 12, 2016 So spent sometime in the Workshop this afternoon, got it back to live , its runs not good but its Alive. So next stepis to assembly the wiring in all the ends Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.