SiBag Posted July 9, 2015 Share Posted July 9, 2015 Had greif with my BIM SB6 (Its got a Suzuki 1100WR motor so it counts) not wanting to select 3rd gear going both ways.Check all the recommended things, gear linkage etc.Any road up Iv decided to replace the box etc.Q. Is it possible to split the motor from the bottom end and replace the gear box internals. Or do I have to strip the motor from the top down ?Also, is it worth getting the gears undercut, and recommended machinist in North West if so. Thanks in advance. Si.. Quote Link to comment
Captain Chaos Posted July 9, 2015 Share Posted July 9, 2015 yes it's possible and yes it's worth. Quote Link to comment
SiBag Posted July 10, 2015 Author Share Posted July 10, 2015 Cheers captain, just need to find a machine show to do the gear set. Quote Link to comment
gsxr884 Posted July 10, 2015 Share Posted July 10, 2015 (edited) Try Nova Transmissions , been doing bike gearbox for ever , they have probably got the specs Edited July 10, 2015 by gsxr884 http://www.novaracing.co.uk/ Quote Link to comment
SiBag Posted July 17, 2015 Author Share Posted July 17, 2015 Cheers gsxr884 I'll take a look. Quote Link to comment
cregnybaa Posted July 22, 2015 Share Posted July 22, 2015 Cheers gsxr884 I'll take a look.Big pockets for nova try Ellis Moore he's in Manchester will try to find some contact details for you. Quote Link to comment
SiBag Posted July 23, 2015 Author Share Posted July 23, 2015 (edited) Would that be "Oily Tom" ?Just found him on tinternet. I'll give him a shout.Thanks cregnybaa Edited July 23, 2015 by SiBag Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.