Mag2 Posted August 17 Posted August 17 Anyone got any ideas for yoke options for the mag 2? I have an 89 slingshot front end in, but the stem needs to be longer, bandit stem is too long. Cheers 1 Quote
baldrick Posted August 18 Posted August 18 PRESS out bandit stem and get a machine shop to make a new one to your spec, and press it in.....sorted. Quote
Dezza Posted August 19 Posted August 19 How short is the GSXR stem? If it's only a few mm, then some careful machining of various bits main gain you enough for it to work, e.g. the castle nut or the bit on the top yoke that mates to the castle nut. ps, If you give up and break the project can I have first dibs on your NWS swingarm? Quote
Mag2 Posted August 19 Author Posted August 19 (edited) Dezza Cheers, that was my initial thinking too. Have the nut machined down a bit. I could gain maybe 2mm. I have around 6mm through the top yoke currently. Wont be giving up unfortunately. 2 yrs in now. Edited August 19 by Mag2 1 Quote
clivegto Posted August 19 Posted August 19 (edited) @caferacerdanused a slingshot stem in his mag2. I used a Harris fully adjustable stem one on myn. Lovely swinging arm, I have a NWS slabby framed bike as well. Edited August 19 by clivegto Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.