boilerdude Posted February 9, 2016 Posted February 9, 2016 (edited) I have many complete extra bandit 1200 wheels laying around. anybody know what slingshot or slabby bits I need to fit them to a slabby (1100)? I know the front disks are too small and the wrong offset. Will slabby disks work or do i need slingshot ones. will they bolt to the bandit wheel. what spacers do i need. Does the bandit speedo drive happen to be the same as slingshot? hows about the rear. any difference between bandit and slingshot (5.5) rear wheel. spacers different? rotor offsets. calipers? sorry just trying to get all the pieces I need before I get cracking Edited February 9, 2016 by boilerdude Quote
wraith Posted February 9, 2016 Posted February 9, 2016 The sprocket carrer on the b12 uses a ditternt sprocket, has the same 20mm spindle. The mk1 front wheel has a worm drive speedo, apart from that I don't know but I have seen it done. Quote
Oilyspanner Posted February 10, 2016 Posted February 10, 2016 The rear caliper hanger is different too (different offset) - I used a Bandit one on my S.Shot - I got fed up with the amount of washer to shim up the slack ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.