400F rev counter wiring

[Gsx1100er]

Putting the rats nest of wires together and I have a question.

The rev counter has a 3 connector plug.

Central pin is Orange/ Green, outer pins are Black/White and Black Red.

I have two available pins on the harness that fit this plug.

Plug 1.

Central pin is Orange/Green , outer pins are Black/White and Black/Yellow

Plug 2.

Central pin Orange /Green outer pins Black/White and Blue

I guess the question , as Orage/White and Black/White are common, would the Black/Red wire connect to the Black yellow on Plug1 or connect to the Blue wire on Plug 2.

I hate wiring.

 

Gaz

 

[Gsx1100er]

4 minutes ago, Gsx1100er said:

Putting the rats nest of wires together and I have a question.

The rev counter has a 3 connector plug.

Central pin is Orange/ Green, outer pins are Black/White and Black Red.

I have two available plugs on the harness that fit this plug.

Plug 1.

Central pin is Orange/Green , outer pins are Black/White and Black/Yellow

Plug 2.

Central pin Orange /Green outer pins Black/White and Blue

I guess the question , as Orage/Green and Black/White are common, would the Black/Red wire connect to the Black yellow on Plug1 or connect to the Blue wire on Plug 2.

I hate wiring.

 

Gaz

 

 

[Dezza]

Orange green is switched positive, black/white earth and black/red the tacho sensor wire. The black red needs to go to the yellow/black which comes from one of the coils (assuming from memory the colour codes are the same as for bigger Suzukis ). I now need another can of Fuller's London Pride.

[Gsx1100er]

What a gent !  On xmas day as well, Cheers mate

Gaz

 

 

[Captain Chaos]

Blue wire is from the neutral switch IIRC. 

Now i need another Grimbergen double ambrée.

[Gsx1100er]

One more wire !!!!!!       Short Green/yellow attached to 4 pin plug on CDI. No connection anywhere near CDI for it to connect to .

Wheres it go ??

 

Gaz