Graeme Posted October 6, 2023 Share Posted October 6, 2023 I've searched, but couldn't find an answer. I'm not keen on the curved oil cooler on my 1990 750, it has no fairing so it looks a bit odd. Can I swap it for an earlier flat one? Do the pipes differ? I believe I can't use bandit, but wondered if all the oil cooled gsxr ones interchange. Thanks. Quote Link to comment
Graeme Posted October 6, 2023 Author Share Posted October 6, 2023 I see slabside and slingshot have different connectors, but will they interchange if the relevant pipes are used too? Quote Link to comment
fatblokeonbandit Posted October 6, 2023 Share Posted October 6, 2023 If you get an earlier flat one it will be over 30 years old!!! get a new one like this on an old 7/11 i did ages ago.. 4 Quote Link to comment
Graeme Posted October 6, 2023 Author Share Posted October 6, 2023 That does look, and no doubt work, much better. Hadnt really considered going new. I guess as long as the size is ok, the pipework can just be made up. Quote Link to comment
fatblokeonbandit Posted October 6, 2023 Share Posted October 6, 2023 Yup make all the hoses myself from torques bits, easy peasy.. Quote Link to comment
Graeme Posted October 6, 2023 Author Share Posted October 6, 2023 19 row? An10, that the right size pipework? Quote Link to comment
fatblokeonbandit Posted October 6, 2023 Share Posted October 6, 2023 Yup 19 row, an8 and 10, some people say 8 is too small but I’ve has an8 on my bandit for Donkies years and it’s fine Quote Link to comment
KennyKak Posted October 7, 2023 Share Posted October 7, 2023 Billet bike bits on face book sell all the brackets to make those coolers fit. I've just picked up a cheap cooler on AliExspress Quote Link to comment
fatblokeonbandit Posted October 7, 2023 Share Posted October 7, 2023 25mm ally angle from ebog, 15 quid, cut it to fit, enough to make top and bottom brackets. much cheaper than bought ready made ones. 3 Quote Link to comment
Pegleg Posted October 7, 2023 Share Posted October 7, 2023 1 hour ago, fatblokeonbandit said: 25mm ally angle from ebog, 15 quid, cut it to fit, enough to make top and bottom brackets. much cheaper than bought ready made ones. Exactly what I've just done. Think you meant 50mm @fatblokeonbandit Couple hours with a hacksaw and drill. Quote Link to comment
fatblokeonbandit Posted October 7, 2023 Share Posted October 7, 2023 Yes I did mean 50 mm, it’s old age you know, can’t remember my name some days.. 2 Quote Link to comment
DAZ Posted October 7, 2023 Share Posted October 7, 2023 1 hour ago, fatblokeonbandit said: it’s old age you know, can’t remember my name some days.. I know that feeling ,sometimes get me wukkin murds fuddled too 3 Quote Link to comment
fatblokeonbandit Posted October 7, 2023 Share Posted October 7, 2023 Same here Brian, 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.