Footrests hole spacing

[HUM]

Hi folks

1.)
Can someone tell me the exact hole spacing for the footrests on a GSX-R 750 W, type: GR7BB is it 75mm or just 74mm center hole to center hole ..?
2.)
which newer models of the GSX-R or SV etc. have the same hole spacing?

cheers

Uli

[jejep4]

It is 72 mm on W 750

Problem is not finding same measure on other bike. Problem is if the angle of rear set is correct afterwards. W has fix points for rear sets at position that will give bad set up if other bike is not similar on fixing points

Edited December 6, 2022 by jejep4

[jejep4]

Also this is WC question, not for oilcooled 

[TJS]

Please let us know if you find something from another bike that fits the W! I tried a Busa set....no luck.

[Joseph]

Not much info on line like a rear set chart for example, and i haven't come up with anything for the W either

@jejep4does have a point though, the way the mounting points are on the W frame, you'll need to find rearsets with also a good enough triangulation of the mounting points to the footpeg, otherwise they'll sit too low (since most bikes rear sets are bolted on a close to vertical mount point line)

[HUM]

On 12/6/2022 at 5:13 PM, jejep4 said:

Also this is WC question, not for oilcooled 

Hi It is not WC  it is mixed AC + OC + WC

and for this Footrests I am looking for rear sets or adapters

 

cheers

 

Uli

 

[Joseph]

Well if you're using adapters and/or a steel frame just buy what you want and weld mounts on accordingly. 

Whats holding you to W rear sets if you're not using a W frame ?

Edited December 8, 2022 by Joseph