Jump to content

TJS

Members
  • Posts

    158
  • Joined

  • Last visited

Everything posted by TJS

  1. I will post details and a "How to.." when it's complete.
  2. Wow! Surprised they have it and by the price!
  3. I don't see it on "Eblag" or Fowlers. I've had the CDI for years, and now trying to do something with it.
  4. The orange and purple(blue) is for the kick stand. The orange and red is for the starter switch.....I believe. I haven't had another opputunity to chase it all down. Hoping someone has done this before wit the V&H or Dyna 2000.
  5. Here is the V&H https://pin.it/5whuhF9xa https://pin.it/4zx00r8T1 https://pin.it/1ra7nV60b
  6. Any one have information on specs or how they wired it up? I would guess it would be wired up similar to the Dyna 200 and the Vance & Hines.
  7. Finally took the risk of ruining the dash...
  8. ECU was moved for protection during crashing, but will fit in the stock position. Get yourself a mask, rubber gloves, dremel, sharpi, and start cutting to fit. It is possible to keep the mudguard, by trimming out the area under the tail light.
  9. This video you can see where I had to cut to fit the exhaust bracket or rear passenger peg.
  10. This video shows the subframe. The only mods is to the black plate holder.
  11. I think it's because you have the black luggage tie down bracket still on. I will try to post a video of mine tomorrow.
  12. I have one on my bike. I angle it up, then slide it on from the rear...like putting on a sock. It should flex a little.
  13. I have a feeling the non-ethanol gas wasn't really "non"!
  14. Leak down checks. So something with the main or emulsion tubes?
×
×
  • Create New...