recardo Posted November 10, 2022 Share Posted November 10, 2022 As per title will a 750k2 swingarm (and shocker) fit on a 1990 750L frame? Would it be a straight bolt on fit, or is some engineering prowess required with spacers and jiggery pokery etc? Ta Quote Link to comment
wraith Posted November 10, 2022 Share Posted November 10, 2022 Think the privet bolt/spindle is a bigger size on the k2 swingarm. Can't say about anything else Quote Link to comment
davecara Posted November 10, 2022 Share Posted November 10, 2022 Swingarm pivot will need sleeving. The bearing sleeves out of a slingshot swingarm should go straight into the K2 arm. Its pretty much the same procedure as fitting a SRAD750 arm iirc You'll want to space the top shock mount out about 15mm, use the K2 knuckle and an adaptor to locate the knuckle mounting to the right place, and a set of adjustable dogbones. 1 Quote Link to comment
Digs Posted November 11, 2022 Share Posted November 11, 2022 You'll also need to sleeve or remake the centre spacer. 1 Quote Link to comment
recardo Posted November 11, 2022 Author Share Posted November 11, 2022 thanks for info guys. K2 back end purchased and trial fit once I get it stripped down to a bare frame. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.