750k2 swingarm on 1990 750L frame

[recardo]

As per title will a 750k2 swingarm (and shocker) fit on a 1990 750L frame?

Would it be a straight bolt on fit, or is some engineering prowess required with spacers and jiggery pokery etc?

Ta

[wraith]

Think the privet bolt/spindle is a bigger size on the k2 swingarm.

Can't say about anything else 

[davecara]

Swingarm pivot will need sleeving. The bearing sleeves out of a slingshot swingarm should go straight into the K2 arm. Its pretty much the same procedure as fitting a SRAD750 arm iirc

You'll want to space the top shock mount out about 15mm, use the K2 knuckle and an adaptor to locate the knuckle mounting to the right place, and a set of adjustable dogbones. 

[Digs]

You'll also need to sleeve or remake the centre spacer.

[recardo]

thanks for info guys.  K2 back end purchased and trial fit once I get it stripped down to a bare frame.