Gs engine oil priming after a rebuild

[Naweld]

What’s the best way to prime my gs1150 engine after a complete rebuild before starting the engine 

Edited July 1, 2022 by Naweld
Miss spelled

[Blubber]

During the rebuilt they should have used assembly lubricant - permatex 81950 or the likes - to prevent worrying about that.

First engine revolutions on the startermotor only - no sparks plugs - untill the oil pressure switch light goes out.

Then fire up.

[Swiss Toni]

As above. Don’t put too much load on the motor at first. And, welcome to OSS. 

[Reinhoud]

Pour a bit of oil in the pump, turn the gears a bit, that should be alriht, the pump suck pretty good