bandit 1200 into slab 750

[grizzlyadams]

hi, i have bought slab 750 with bandit 1200 motor fitted , [badly] the more i look at it the worse it gets ,  frame lug has been cracked , spacers from what bike should have been used ?  is it the 750/1100 slab spacers?  do the slab spacers need mods ? looks like one has been cut  

[Blue]

I believe that basically the outside of the engines are the same  the 11 & 12 is about 20mm taller. So apart from the rear engine mount having a larger bolt you use the 750 brackets

[grizzlyadams]

41 minutes ago, Blue said:

I believe that basically the outside of the engines are the same  the 11 & 12 is about 20mm taller. So apart from the rear engine mount having a larger bolt you use the 750 brackets

thanks , brackets , bolts are there , spacers  look wrong , trying to save time on spacers  , looks like 4 spacers needed , 2 at rear most bolt and one underneath , are these standard size slab spacers ? 

[gray711]

I used the original 750 slabby ones on both 11 & 12 motors on my 7/11/12.

[clivegto]

You need the 750 brackets & spacers or just measure the gap and make your own.