Highwaystar Posted May 3, 2021 Posted May 3, 2021 Has anyone fitted one of these fork braces ?. I was looking to get one for my GS1000 but was wanting to find out how much clearance there was between the brace and guard as i am fitting a fiberglass race style front guard which may sit a little lower than standard and didn't want to see to much of a gap. I can't get an answer from fastec. 1 Quote
wraith Posted May 3, 2021 Posted May 3, 2021 Look the same as the Micron brace, if so the bottom of the cross member part will sit about level with the bottom of the fork seal/dust cover on the fork. 1 Quote
denisd Posted May 3, 2021 Posted May 3, 2021 1 hour ago, Highwaystar said: Has anyone fitted one of these fork braces ?. I was looking to get one for my GS1000 but was wanting to find out how much clearance there was between the brace and guard as i am fitting a fiberglass race style front guard which may sit a little lower than standard and didn't want to see to much of a gap. I can't get an answer from fastec. That's nice, is that for the standard Gs1000 forks? Quote
Highwaystar Posted May 3, 2021 Author Posted May 3, 2021 53 minutes ago, wraith said: Look the same as the Micron brace, if so the bottom of the cross member part will sit about level with the bottom of the fork seal/dust cover on the fork. OK thanks Quote
Highwaystar Posted May 3, 2021 Author Posted May 3, 2021 49 minutes ago, denisd said: That's nice, is that for the standard Gs1000 forks? Yea, on Eblag, comes with or without the fastec logo and polished or anodized black £120 1 Quote
Muddy Posted May 3, 2021 Posted May 3, 2021 I have one fitted to an 1100 Katana. They are a nice bit of work. Quote
Highwaystar Posted May 3, 2021 Author Posted May 3, 2021 Just now, Muddy said: I have one fitted to an 1100 Katana. They are a nice bit of work. Thanks for info, they do look nice Quote
denisd Posted May 3, 2021 Posted May 3, 2021 1 hour ago, Highwaystar said: Yea, on Eblag, comes with or without the fastec logo and polished or anodized black £120 Thanks for that, I just might invest in a black one. 1 Quote
Highwaystar Posted June 3, 2021 Author Posted June 3, 2021 Pleased with the fastec fork brace. For reference it would have required my standard mudguard to have had the bolt holes elongated a few mil as it was sitting to high for brace to fit (think my guard may be a pattern part though) no such problem with the fiberglass guard. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.