Does a Busa rear wheel fit a Blandit 1200 swing arm?

[Akira]

Hi guys, 

I want to fit a Busa rear wheel on my gs1100. Now i have read that a Blandit 1200 swingarm fits my frame bolt on (will make a dual shock).

Now my question is, does a Busa rear wheel with a 190 tire fit the swinger?

Did find some topics wich helped but none which answered the question... 

 

Could you guys help me out a bit

Edited April 6, 2021 by Akira

[TonyGee]

you might have problems with the chain with a 190 tyre ?  i have a B12 rear wheel and swinger in my 750ET and the chain is close to the frame and 180 tyre.  if you cut out the frame and weld a flat in it you will get more room. 

[no class]

if you use a bandit 1250 arm the axle sizes are the same . 

[Akira]

Thanks, will look for a 1250. Maybe I'll go for a TL1000 swingarm but have to do some frame work then

[Rene EFE]

Yes. 200-tyre in my EFE with no offset front sprocket.

[Akira]

21 hours ago, Rene EFE said:

Yes. 200-tyre in my EFE with no offset front sprocket.

Nicee! Did you had to do some changes with the wheel axle? Or something?

 

Awesome bike tho

[Rene EFE]

Yes, it's a spacerkit @WimBaas figured out. Not sure if the carrier is machined down. It's a straight swap as it is now.