K series wheels. Caliper

[Jdeac]

Hi all I'm in the process of doing the k1-4 5.5 rear wheel swap. 

My question is what caliper hanger do people use. Ive got a 94/5 top braced swinger in a 750 m. I would like to retain the stock hanger and not run a torque bar. I'm guessing I can get the hanger machined down. The find a disk to suit. Just wanted to know other peoples ideas.

Any help appreciated 

Cheer

[badger]

I've got a gsxr 1100 wheel, k8 disc, caliper and hanger. Not 100% but I think the spacing caliper to disc is the same pretty much across the board 

[Jdeac]

I know the disk from the centre of the wheel Is the same. But I was more looking at caliper hanger options. The wheel is centred 

Pic with spacer is temporary. I'm guessing that a top hat spacer made to sit flush with the hub. Then the original hanger machined down to fit. Or a k hanger??? I'm just not sure. First time looking at something like this.

[TonyGee]

you can't use the hanger in your hand if your not using a torque arm, you will need one that slots into the mount thats welded to the swinger.  

[Jdeac]

The one in my hand is the original to the 94/95 swinger. Just to wide with the wheel centred. Still waiting on a rear caliper etc. Didnt know if the k caliper hanger would be better to use. Even if I have to use a torque  arm.

[wraith]

Have a look at my,

project kat part errrrr 

Last post was in August 2020 

As I've got the same swing arm but change the rear brake etc to a gsxr1000k5 and still using the 94/95 swing arm and wheel. 

Mite be of help.

 

[Jdeac]

I'll check that out. Cheers