shaunbrogdon Posted June 28, 2020 Share Posted June 28, 2020 Does anyone happen to know a ballpark figure for the mixture screws as standard. Im working on one at the minute but the carbs are in a right state. Had to get the snap on blowtorch on the mixture screws to get them to cone out, but couldn't wind them in until they seated to find out how many turns out they were. Any help would be appreciated. Cheers Quote Link to comment
Captain Chaos Posted June 28, 2020 Share Posted June 28, 2020 factory service manual says 1 1/8 turns back, except E18 market (Switzerland) 1 3/4 turns back. Quote Link to comment
Captain Chaos Posted June 28, 2020 Share Posted June 28, 2020 E-24 (Australia), E-22 (W. Germany) and E-39 (Austria) 1,0 turn back (didn't see that right away... I blame the Desperados I just had) Quote Link to comment
Askamaskinservice Posted June 28, 2020 Share Posted June 28, 2020 3 hours ago, Captain Chaos said: I blame the Desperados I just had) Don't blame them, take another one instead. Quote Link to comment
Dezza Posted June 28, 2020 Share Posted June 28, 2020 And then come to your senses. I'll get me coat Quote Link to comment
shaunbrogdon Posted July 5, 2020 Author Share Posted July 5, 2020 On 6/28/2020 at 5:37 PM, Captain Chaos said: factory service manual says 1 1/8 turns back, except E18 market (Switzerland) 1 3/4 turns back. Cheers Joris I'll get them.taken back out and adjusted Quote Link to comment
.thumb.jpg.6586b8561de62416a85a777e467db6c7.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.