CockneyRick Posted May 16, 2020 Share Posted May 16, 2020 I swear i'm having a blonde moment here, but which way does the rim go? It's stripped after P/coat & i have the wide & narrow openings to the bearing seats. What size goes to what side? Quote Link to comment
Jaydee Posted May 16, 2020 Share Posted May 16, 2020 Srads have a speedo cable drive, don't they? On the left side it should have 4 tabs, any two engage the tabs on the speedo cable drive. Quote Link to comment
banoffee Posted May 16, 2020 Share Posted May 16, 2020 26 minutes ago, Jaydee said: Srads have a speedo cable drive, don't they? Nope Quote Link to comment
CockneyRick Posted May 16, 2020 Author Share Posted May 16, 2020 Exactly, they're electronic speedo! Quote Link to comment
CockneyRick Posted May 16, 2020 Author Share Posted May 16, 2020 And that's the wide side on view. If i had to guess i'd say that side belongs on the right. But that's only cos the spindle is wider on that side, even though it wouldn't make any difference once bearing is in? Quote Link to comment
Captain Chaos Posted May 16, 2020 Share Posted May 16, 2020 you need some immagination but when the wheel is turning, the valve is "protected" by a spoke. So in the pic above we're looking at the left side of the wheel. 1 Quote Link to comment
Captain Chaos Posted May 16, 2020 Share Posted May 16, 2020 another method: on the rear wheel the cast text is on the left side of the spokes, on the front wheel is the same. 1 Quote Link to comment
CockneyRick Posted May 16, 2020 Author Share Posted May 16, 2020 20 minutes ago, Captain Chaos said: you need some immagination but when the wheel is turning, the valve is "protected" by a spoke. So in the pic above we're looking at the left side of the wheel. Well i never knew that! Although it obviously makes sense Every days a school day Quote Link to comment
Losiu Posted May 16, 2020 Share Posted May 16, 2020 (edited) At 99% on the front wheel from SRAD is a directional arrow I'll be home from work in the morning and I'll check it out. Unless the front wheel I put on is not from SRAD :P Edited May 16, 2020 by Losiu 2 Quote Link to comment
Losiu Posted May 17, 2020 Share Posted May 17, 2020 (edited) Edited May 17, 2020 by Losiu 1 Quote Link to comment
CockneyRick Posted May 17, 2020 Author Share Posted May 17, 2020 Excellent, thank you peeps, i'll get it reassembled now Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.