Screwriverracing Posted May 11, 2020 Posted May 11, 2020 Hi All, has anyone fitted a cam sensor to a EFE, if yes how did you do it and got any pics? Cheers SRR Quote
Arttu Posted May 12, 2020 Posted May 12, 2020 Yes. Some additional info on my project thread, 2 first pages. Quote
Gixer1460 Posted May 12, 2020 Posted May 12, 2020 Did similar with a GSXR except my sensor bolts to a plate that is bolted to the cover. Cam is drilled and tapped M6 to receive a cut down steel screw as a trigger tooth that sits under the sensor. Quote
Screwriverracing Posted May 12, 2020 Author Posted May 12, 2020 Thanks Arturo, how close to the cam does it sit, and what degree btdc does it read? any pics of inside the cam cover? Cheers SRR Quote
Arttu Posted May 13, 2020 Posted May 13, 2020 The gap between the sensor and cam lobe is about 1-1.5mm. There's nothing special inside the cam cover, just all the normal bits like on every EFE engine Here's one pic from setting up phase that shows how the sensor is relating to the cam. I don't remember if I ever measured the triggering position of the sensor. With my ECU (MS3) the exact position isn't important. The cam sensor only needs to tell on which cycle the engine is going. Actual timing is done by missing tooth wheel on the crank. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.