Jump to content

JMC swingarm


Recommended Posts

Morning, picked up this swingarm for a project.

I think it's for a bandit, measurements are 223mm at the pivot and 260mm at the rear, can anyone shed some light on its origin

Hopefully it's going to have a new home in a slingshot , Iam already aware of the need spacers for the front pivot

Thanks in advance

IMG_20200129_093839242.thumb.jpg.d819b341e3f35e8de2dc11b070ce90d1.jpg

 

  • Like 2
Link to post

 My fault, perhaps I should have been a bit clearer in my first post, can anybody confirm it's a bandit swingarm or does anybody have the measurement of a bandit swingarm pivot and rear wheel width.

Cheers

Link to post

I also got a unbranded b12 JMC arm in me turbo b12. Spindles are 20mm, JMC made them wider where the wheel sits. This one came with some big ally spacors one each side about 5mm for the standard wheel. My one has 6 inch srad wheel in & still uses spacors. 

IMG_20200129_164925.jpg

IMG_20200129_164410.jpg

IMG_20200129_164446.jpg

Link to post

Looking at the torque arm lug makes me wonder if it's a later model srad swinger,

Was the srad  pivot and axle bolts 20mm ?

Have a feeling they were bigger.

Looking like I'll have to make the spacers up

 

 

 

Edited by stellafella
Afterthought
  • Like 1
Link to post
6 minutes ago, stellafella said:

Looking at the torque arm lug makes me wonder if it's a later model srad swinger,

Was the srad  pivot and axle bolts 20mm ?

Have a feeling they were bigger.

Looking like I'll have to make the spacers up

 

 

 

No, I sleeved the wheel spindle to fit the srad wheel. 

  • Like 1
Link to post
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...