stellafella Posted January 29, 2020 Posted January 29, 2020 Morning, picked up this swingarm for a project. I think it's for a bandit, measurements are 223mm at the pivot and 260mm at the rear, can anyone shed some light on its origin Hopefully it's going to have a new home in a slingshot , Iam already aware of the need spacers for the front pivot Thanks in advance 2 Quote
stellafella Posted January 29, 2020 Author Posted January 29, 2020 front pivot is 20mm and the axle is also 20mm cheers Quote
clivegto Posted January 29, 2020 Posted January 29, 2020 That looks like b12 or slingshot fitment. Quote
stellafella Posted January 29, 2020 Author Posted January 29, 2020 21 minutes ago, clivegto said: That looks like b12 or slingshot fitment. Ive offered it up to my slingshot frame and it about 12mm shy on width at the pivot mate Quote
stellafella Posted January 29, 2020 Author Posted January 29, 2020 My fault, perhaps I should have been a bit clearer in my first post, can anybody confirm it's a bandit swingarm or does anybody have the measurement of a bandit swingarm pivot and rear wheel width. Cheers Quote
clivegto Posted January 29, 2020 Posted January 29, 2020 I also got a unbranded b12 JMC arm in me turbo b12. Spindles are 20mm, JMC made them wider where the wheel sits. This one came with some big ally spacors one each side about 5mm for the standard wheel. My one has 6 inch srad wheel in & still uses spacors. Quote
clivegto Posted January 29, 2020 Posted January 29, 2020 (edited) Guess what I also got a slingshot JMC arm as well. How wide is the dog bone mounting point that should be the give away. Edited January 29, 2020 by clivegto 1 Quote
stellafella Posted January 29, 2020 Author Posted January 29, 2020 Cheers Clive, your a star. 1 Quote
stellafella Posted January 29, 2020 Author Posted January 29, 2020 (edited) Looking at the torque arm lug makes me wonder if it's a later model srad swinger, Was the srad pivot and axle bolts 20mm ? Have a feeling they were bigger. Looking like I'll have to make the spacers up Edited January 29, 2020 by stellafella Afterthought 1 Quote
clivegto Posted January 29, 2020 Posted January 29, 2020 6 minutes ago, stellafella said: Looking at the torque arm lug makes me wonder if it's a later model srad swinger, Was the srad pivot and axle bolts 20mm ? Have a feeling they were bigger. Looking like I'll have to make the spacers up No, I sleeved the wheel spindle to fit the srad wheel. 1 Quote
clivegto Posted January 29, 2020 Posted January 29, 2020 JMC had a few variations one there own stuff. 2 Quote
Allspeeds Posted January 31, 2020 Posted January 31, 2020 Clive how much treasure do you actually have hidden away?? I mite start calling you pirate Clive 3 Quote
Rossco(Iceman Josros) Posted July 27, 2020 Posted July 27, 2020 On 1/31/2020 at 10:20 PM, Allspeeds said: Clive how much treasure do you actually have hidden away?? I mite start calling you pirate Clive F ing loads 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.