ibrakeformoose Posted December 31, 2019 Posted December 31, 2019 (edited) Looking to repaint an oxidised Bandit 1200 lump.. any suggestions or good experience with a product? Not wanting to split this motor (as well!!) Edited December 31, 2019 by ibrakeformoose Quote
Captain Chaos Posted December 31, 2019 Posted December 31, 2019 Volkswagen/Audi Daytonagrau LZ7S is a good match for original B12 engine colour Quote
ibrakeformoose Posted January 2, 2020 Author Posted January 2, 2020 Thanks, etch prime underneath or straight on? I have read that you don't need heat-proof paint, but I'd be worried about that..? Quote
Metlhd Posted January 2, 2020 Posted January 2, 2020 Duplicolor TB102 is a commonly used "spray-bomb" and I have personally used. Good match and easy to use, just a THOROUGH cleaning and several lights coats. Bear in mind, most aerosols are NOT Fuel resistant. Just saw this posted on the 1st Gen F.B. page. Looks like an exact match but again, an aerosol so I doubt it's fuel/chem resistant. https://www.ralaerosols.com/product/ral/aerosols/ral-7021-spray-paint-can/ Quote
carlinmidarlin Posted January 2, 2020 Posted January 2, 2020 (edited) I used 2k paint on mine , the engine was fully de greased , 2k primer and then the top coat with good results Edited January 2, 2020 by carlinmidarlin Quote
dupersunc Posted January 2, 2020 Posted January 2, 2020 You'll need a 2k laquer at least if you want it fuel tolerant. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.