Katana 1100 frame

[no class]

looking for the weight of a stock unmolested  bare kat 1100 frame ..... anyone ? thnx

[clivegto]

3 hours ago, no class said:

looking for the weight of a stock unmolested  bare kat 1100 frame ..... anyone ? thnx

Got ET baer one which are nearly the same. 

[no class]

6 minutes ago, clivegto said:

Got ET baer one which are nearly the same. 

should be close enough ......although the Kat footrest and tank mount will add a few lbs .....you got a scale to check that out Clive ? thnx

[clivegto]

36 minutes ago, no class said:

should be close enough ......although the Kat footrest and tank mount will add a few lbs .....you got a scale to check that out Clive ? thnx

Bathroom scale will give a rough idea, will dig frame out tomorrow. 

[no class]

 thnx

[clivegto]

According to my bathroom scales ET frame is 41lb, but it still got centre stand & horn attached. 

[IceKat]

just checked mine its Weighing in at 21kg

[no class]

Thanks gents.....much appreciated .

[baldrick]

That's quite a bit heavier than I thought it would be. 

Are you planning a new frame build no class?

 

go on-do it...

[no class]

37 minutes ago, baldrick said:

That's quite a bit heavier than I thought it would be. 

Are you planning a new frame build no class?

 

go on-do it...

Actually.... I was starting to get back into the 2 projects I had forgotten and left for dead . Pulled out the frames and was curious to see how much they weighed in comparison to the stock frame , after the alterations .  So.... after removing all the unwanted bracketry and such ..... here is where it stands .... 36 ish lbs (16.3 kg)for the twin shock frame ..... and 44 lbs (19.9 kg)for the mono shock frame....there is however , the original footrest frames and steering lock .... as well as the cut twin shock mounts..... all of which the other frame is missing . 

Edited December 28, 2019 by no class