Jump to content

EFE tachometer wiring.


Recommended Posts

Does anyone happen to know what wires do what for an EFE tacho? I'm chopping a set up to mate to a bandit 1200 clock loom, and the EF tacho has a white, brown, and an orange. The white came through the back of the clocks and tied into the earths for the back lights. The B12 tacho has a black with white tracer, black with red tracer, and an orange with green.

20191220_143233.jpg

20191220_143312.jpg

Link to comment
Just now, Gixer1460 said:

Don't think the wires on the clock are original as from the manual they should be orange/green = ign sw. 12v, Black / yellow = tach signal from CDI and Black / white = ground / earth. The tach can often be black / red or red / black as in your 2nd photo.

2 sets here and both the same. The wiring from the multiplug down the loom is as you say. Clock internal wiring is different. Some matches the wiring in the main loom, some is different

Link to comment

Just gone through all the connections on my EFE clocks recently and this is what i found. And if my memory serves me right the white wire was spliced in to the black and white wire circuit. but the two others are 50/50 guesswork, but my educated guess is that Orange is positive feed. 

1663955629_Skjermbilde2019-12-20kl_18_45_41.png.c806c5a124600fd7dd88b3cb76dd22ec.png

831394321_Instrumentterminal.thumb.jpg.a348cfaf875820605577b492be704d7a.jpg

Edited by ZenViking
Mixed the colors
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...