cluster wont turn on bike wont start

[jameskat]

To fit blade style you would have to change the fuse holder, just get a few of the glass fuses, if you have a short your are going to blow a couple till you find the short.

[Pudzrx]

Was gonna joke put a bolt across it and see which wire smokes , but the op might take that too literally lol . I would have just swapped another fuse for now just to see if it starts .

Puddy 

[v-twinwalker]

so that small horn like mechanism was some type of alarm, when i flicked indicators and i only tried on those the little box started going off, i just want to completely disconnect it, but im guessing it runs through all my wiring 

[Blubber]

7 hours ago, v-twinwalker said:

so that small horn like mechanism was some type of alarm, when i flicked indicators and i only tried on those the little box started going off, i just want to completely disconnect it, but im guessing it runs through all my wiring 

if you put it that way...  it probably is a turn signal reminder .

[v-twinwalker]

11 hours ago, Blubber said:

if you put it that way...  it probably is a turn signal reminder .

i wish lol, its hooked up to my clutch wire and i disconnected it so now my bike wont start, so its definently a security thing, gotta reconnect it lol