slabbyfaceddean Posted July 23, 2019 Share Posted July 23, 2019 My engine code starts J-703 any one got any ideas, it suppose to be 1100 . Not a 250 Quote Link to comment
banoffee Posted July 23, 2019 Share Posted July 23, 2019 https://sites.google.com/site/suzukitechnical/suzuki/sacs-enginecodes My guess is U-703 that's a bit worn off... Quote Link to comment
slabbyfaceddean Posted July 23, 2019 Author Share Posted July 23, 2019 It's ok panicking then, just took this pic Quote Link to comment
Gixer1460 Posted July 23, 2019 Share Posted July 23, 2019 Well if it is U703 - it shouldn't have that on the barrels..........someone's been playing with it! Quote Link to comment
slabbyfaceddean Posted July 23, 2019 Author Share Posted July 23, 2019 Yeah the whole bike is showing signs of being tampered/ improved, ohlins, 1127 engine , lockwired sump etc. It's being stripped to go to 1216 anyway see what that uncovers Quote Link to comment
69chris Posted July 24, 2019 Share Posted July 24, 2019 just looking at that link, the engine in my K is a V711 but i dont think iv ever seen that on one of those lists ?? Quote Link to comment
Gixer1460 Posted July 24, 2019 Share Posted July 24, 2019 8 hours ago, 69chris said: just looking at that link, the engine in my K is a V711 but i dont think iv ever seen that on one of those lists ?? Enthusiast lists aren't foolproof but using Suzuki's normal code methodology the V710 will have changed to V711 (as your's is marked) on the change of cam drive ie. the 'M' series. Assuming the head on yours is screw & locknut style, I wonder if someone has swapped out the M head to an earlier one as they didn't like the shim style? 1 Quote Link to comment
Duckndive Posted July 24, 2019 Share Posted July 24, 2019 10 hours ago, Gixer1460 said: Enthusiast lists aren't foolproof but using Suzuki's normal code methodology the V710 will have changed to V711 (as your's is marked) on the change of cam drive ie. the 'M' series. Assuming the head on yours is screw & locknut style, I wonder if someone has swapped out the M head to an earlier one as they didn't like the shim style? Yes that would be about right I have a V711 motor that is Shim Head.... Quote Link to comment
slabbyfaceddean Posted July 24, 2019 Author Share Posted July 24, 2019 Will find out when I get out , hopefully tomorrow Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.