Jpich85 Posted February 16, 2019 Posted February 16, 2019 I like the look of the clutch window and would like to a this project to the list but after taking the clutch cover off I can’t really see that it’s possible as it has the part that operates the clutch running down the middle of the cover, just wanted to ask if anyone’s still done this or is it’s possible? Quote
Swarf Posted February 17, 2019 Posted February 17, 2019 I've seen it done but to be honest the mechanism hides most of the clutch anyway....... Quote
CockneyRick Posted February 17, 2019 Posted February 17, 2019 It's so "old hat" these days, not many people do it anymore on any bike Quote
vizman Posted February 17, 2019 Posted February 17, 2019 Can the blandit 6 sprocket cover clutch actuator set up not be used? Quote
jonny1bump Posted February 17, 2019 Posted February 17, 2019 That would spoil a lovely clutch action. 1 Quote
Ben Slabby Posted February 17, 2019 Posted February 17, 2019 34 minutes ago, vizman said: Can the blandit 6 sprocket cover clutch actuator set up not be used? Fink he's on about the 750 slingy with the clutch gubbins in the actual clutch cover. Quote
Ben Slabby Posted February 17, 2019 Posted February 17, 2019 Anyhow, yes you probably could, 2 half windows or something. If people take the time to cut tiny windows into their rocker covers, then it's hardly a stretch. Great fun if you're the sort of person that's entertained by watching the washing machine. 1 Quote
Jpich85 Posted February 17, 2019 Author Posted February 17, 2019 Thanks guys I know it is just a bit of bling but think the machining of it and try to make one would be a fun challenge, think I’ll leave it as it’ll probably look rubbish with the mechanism running through the centre of it Quote
vizman Posted February 17, 2019 Posted February 17, 2019 1 hour ago, Ben Slabby said: Fink he's on about the 750 slingy with the clutch gubbins in the actual clutch cover. Yeah I guessed that, but I was wondering if you could use the b6 set up thus allowing you to cut the clutch actuating shit off the 750 clutch cover, so he could put a window in it.... Quote
Ben Slabby Posted February 17, 2019 Posted February 17, 2019 (edited) 7 hours ago, vizman said: Yeah I guessed that, but I was wondering if you could use the b6 set up thus allowing you to cut the clutch actuating shit off the 750 clutch cover, so he could put a window in it.... Nah, pushes the wrong way and the input shaft isn't hollow to take the pushrod from the slave cylinder. Edited February 17, 2019 by Ben Slabby Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.