Swingarm for gsx1100

[la fouine]

Salut. 

 

Je voudrais changer le bras oscillant de mon gsx 1100 pour un bras de gsx1400 ou tlr. Avez vous des infos? Merci

 

Hello

I would like to change the swingarm of my gsx 1100 for an arm of gsx1400 or tlr. Do you have any info? Thank you

 

 

Edited January 24, 2019 by la fouine

[la fouine]

[la fouine]

sorry I was wrong section 

[370steve]

have a look see into my GS1157 build thread, i fitted a GSX14 swing arm to my GS750 frame

[R1guy]

There’s a rather trick gs1000 track bike floating around with gsx1400 swinger.

Cant find any photos of it but I seem to remember its got gold R1 usd front end , yss piggyback shocks and red/grey bodywork- May jog someone’s memory

[la fouine]

11 hours ago, 370steve said:

have a look see into my GS1157 build thread, i fitted a GSX14 swing arm to my GS750 frame 

I will look at this, and in passing, the realization is beautiful!

[la fouine]

du coup, j'ai acheté un bras de gsx 1400, plus qu'à attendre...

suddenly, I bought a 1400 gsx arm, more than wait ...

[busa ash]

I also am using a gsx 1400 arm in my jigsaw bike

[la fouine]

quelqu'un a les dimensions d’ un bras de tlr par curiosite?

merci

 

does someone have the dimensions of tlr arm of curiosity?

thank you 

Edited February 5, 2019 by la fouine

[370steve]

what measurements do you need? i can measure mine

[wraith]

I think the gsx1100et frames are wider than the gs frames.

Or should I say I've put a JMC swing arm off a gs1000 into my gsx1157et and had to space the swing arm out as there was apx 30mm extra room, and there is more room for chain run on the ET than on my Kat 

Mite be of useful info 

[370steve]

yep, frame between swing arm mounts = 23.5cm, TLR swing arm spindle end = 23cm

[la fouine]

On 2/5/2019 at 10:15 AM, 370steve said:

what measurements do you need? i can measure mine

merci, mais ce n'est pas grave, j'ai recu mon bras de 1400 gsx

thank you, but it does not matter, I received my 1400 gsx arm 

[la fouine]

21 hours ago, 370steve said:

yep, frame between swing arm mounts = 23.5cm, TLR swing arm spindle end = 23cm 

J'ai un écart de 225 mm sur mon Gsx

I have a gap of 225 mm on my Gsx

[la fouine]

Pour mon montage, je vais faire des entretoises pour rattraper le bon diametre d'axe (c'est provisoire sur les photos) et je vais retailler le bras pour le mettre à la bonne largeur

For my assembly, I will make spacers to make up the right axis diameter (it is temporary on the photos) and I will resize the arm to put it to the right width

[la fouine]

[la fouine]

[la fouine]

[la fouine]

salut les gars!

j'ai monté le bras oscillant , ça c'est bien passé

j'ai coupé aux dimensions du 1100 gsx, adapté des entretoises provisoires et ça se presente bien

mon soucis, le bras touche le bloc moteur, je dois donc rectifier tout ca, et il faut que je revois le positionnement des amortisseurs.

voila, je dois dire que ca monte plutot bien, je poursuivrai la suite sur mon post!

merci en tout cas pour votre aide, et si vous avez d'autres conseils pour la suite, je suis preneur

 

Hi guys!

I mounted the swingarm, it went well

I cut to the dimensions of 1100 gsx, adapted temporary spacers and it looks good

my worries, the arm touches the engine block, so I have to rectify all that, and I must review the positioning of the shock absorbers.

here, I must say that it rises rather well, I will continue the continuation on my post!

thank you in any case for your help, and if you have any other advice for the future, I'm interested

[la fouine]