MK2 B12 carb spacing

[no class]

anyone have the carb spacing dimensions for the mk2 b12 ?

[Nickel]

77-93-77 equal to GSXR

[Jaydee]

2 hours ago, Nickel said:

77-93-77 equal to GSXR

Not quite, gsxr (assuming you mean slingshot) is the same spacing as mk.1 bandit. Mk.2 carbs are a few mil different spacing to mk.1

@no classI have 2 sets of mk.2 carbs on the shelf. I can measure them when I get home later if needed. 

[Nickel]

Yes I mean the slingshots, but I can't confirm that mk2 has different spacing.

Put an MK2 carb to MK1 engine without any trouble in spacing. They went straight in.

[Foz]

Inlet rubbers on a mk1 are the same as the gsxr for 36mm carbs, part numbers run aequentially 1-2-3-4 where as the mk2 inlet rubbers aren't they are 2-2 in that the left 2 are the same and the right 2 are the same 

[SiBag]

7 hours ago, Nickel said:

77-93-77 equal to GSXR

The Ports are the same spacing, BUT the carbs are spaced differently on the MK-II Blandit, (Different carb rubbers).

@no classIf your using MK-II carbs you will need MK-II carb rubbers.

[no class]

Thanks fellas

[Nickel]

Sorry for the confusion. I can 't remeber whether I changed the rubers too. Only thing I can remeber is that it went straight in.