Any "XRO" Historians on here ???

[Evoluzione]

As the title say's ... trying to find any info or links as I have a XRO6 arm on a carbed SRAD I bought years ago and can not find any info online.thanks

[dupersunc]

Srad race kit stuff was xro5,6,7,8,9  not  xr0 (zero).

Harris ran them in wsb in that era, so I'd start with them.  

I'll pm you the name of another chap who may be able to help.

[Evoluzione]

1 hour ago, dupersunc said:

Srad race kit stuff was xro5,6,7,8,9  not  xr0 (zero).

Harris ran them in wsb in that era, so I'd start with them.  

I'll pm you the name of another chap who may be able to help.

Do that all the time confuse 0 with O,heres the offending part ....

[Mar71n]

XR0 Harris arm.

Yours looks like an Corona era bikes arm, this one has a cut out between the brace & the arm but I`ve seen a version like yours.

Suzuki XR09 Factory Alstare Corona bike.

[dupersunc]

2 hours ago, Mar71n said:

XR0 Harris arm.

Yours looks like an Corona era bikes arm, this one has a cut out between the brace & the arm but I`ve seen a version like yours.

Suzuki XR09 Factory Alstare Corona bike.

That looks like a Harris built arm, rather than a factory XRO.    XRO bikes were customer face bikes.  Harris ran the factory wsbk in the early days, before Alstare.   The full factory bikes were way tricker than the XRO bikes.

Edited December 22, 2018 by dupersunc

[Mar71n]

On 12/22/2018 at 2:52 PM, dupersunc said:

That looks like a Harris built arm, rather than a factory XRO.    XRO bikes were customer face bikes.  Harris ran the factory wsbk in the early days, before Alstare.   The full factory bikes were way tricker than the XRO bikes.

You are right, it is a Harris arm & The XR0 is the designation for Suzuki factory parts. Still quite special as Harris only made 16 of them.

Edited January 2, 2019 by Mar71n
As ever spelling

[sanders]

Hi all, I've just found this discussion while searching for "Suzuki XR09". I'm trying to find info on the 1999 XR09 Factory Alstare Corona bikes (as per #7 shown above), specifically info on the electrics. The bikes had dual fuel injectors, and I understand that the wiring harness had a 7 pin MIL connector to which a fuel adjustment module connected in order to set-up/tune the fuelling. Does anyone have any knowledge/info regarding this fuelling adjustment system? Any help much appreciated.