-
Posts
1,250 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by GeorgeEI7KO
-
-
1 hour ago, Nik said:
I am fitting an R6 swingarm to a 750 slabby just now. Do you mind sharing some more info/photos?
There a build thread there full of photos mate.
- 1
-
1 hour ago, davecara said:
You can make almost anything fit with top hat spacers. There can be a LOT of faffing to make them work correctly though. The slabby linkage would have to be swapped out and you would need to spend time working out your rising rates etc.
Look at the build threads on here though, lots have done it. @clivegto has done on his scratcher albeit a 750's, @Leblowskiswapped a different swingarm into a 750, I'm fitting a slingshot arm in my 750 and @GeorgeEI7KOhas a B12 arm in his. So its well do-able
Anything will fit if you've a big enuff 'ammer Dave. B12 into slabby.... A piece of piss. My 16 year old lad would manage it. They key to the slabby is to retain the standard lever and shock length. I've a shock outta an aRse6 from a yammahoohaa in there. Works reet. And bin the off centre spacer for the big bearing on the lever and get one made with the hole centered.
-
1 hour ago, imago said:
You must love travelling up and down the country in shite weather when you're knackered.
You're fooling no one, I bet you're working away like a daemon on the Slabby, ferry and hotel booked and you'll be there with it on the stand.
I'm a maybe/probably/possibly at the minute Paul. I need to speak to them about the trade stand then decide if it's trade, OSS or neither because I'm working on the draw through.
To my eye the ET was a bit of an odd fish on the Stafford stand in that it's a nice classic Suzuki. Plenty of those about at the shows, even an identical one (bar the exhaust) on the Air Cooled Suzuki stand. So I'd rather be at a show with a bike I feel better suits the OSS/modified vibe. Hopefully the draw through may be somewhere near at that point, so we'll see how it goes.
I haven been out near it since before I left for Stafford. Been on nights since I got back. But im off from tomorrow morning for 10 days or so. Ive a pile of radio work to plough through to generate some cash. My target is Stafford. All ahead full!!!!!
- 2
-
I'll pass... To cold for me lol. Besides, I'll be busy getting ready for Stafford next year...
-
37 minutes ago, gsx said:
That's good to hear , bits should be here today
Just make sure to tighten everything proper Jay......
- 1
-
I'll be there by the way. Unfortunately the slab won't. It would cost me a fortune between van hire and ferry, the money will be better spent to get her done and ride it over for next year. So y'all will just have to look at my handsome face instead...
- 2
-
29 minutes ago, gsx said:
Oh one each then mate!
And Clive can get to hear your idling Cummins diesel impression Jay! Lol
- 1
-
19 minutes ago, Paulm said:
It was
Except nursing the sore head Saturday morning. Lol.
- 1
-
6 hours ago, davecara said:
See if you can find some of that Moonshine @Blubber brought over, that'll keep you toasty in the back of a van if you drink enough of it!
You'd prob run the feckin van on it dave
-
50 minutes ago, gsx said:
Really ? Too fucked to notice . Was an ace weekend mate, thank-you
You seemed grand to me Jay. Not a bother on ya...
- 1
-
Mighty craic. See you all at Stafford!
- 3
-
14 minutes ago, davecara said:
You’re welcome
Im planning on drinking heavily all weekend and I’m bringing @Dezmeisterand @GeorgeEI7KOwith me so I don’t reckon I’m going using anywhere!
I can't bloody wait.
-
Yup... I'll be there.
- 2
-
2 hours ago, davecara said:
Youve got to hope my kids dont scare you back over the Irish sea yet!
They couldn't be any worse than mine
-
Hopefully i will be there too. Be good to put faces to the names.
-
-
If I had a van I'd be over with the parts bin slabby in its current state. Maybe next year. Enjoy the show lads!
-
On 9/19/2022 at 7:03 PM, Duckndive said:
motor , hood , trunk fender , color the list goes on
and they drive on the wrong side of the road
-
-
33 minutes ago, Joseph said:
OP mentioned big end and mains ? And i'm guessing the OSS discount won't cover the import duties
Bring stuff from the UK to Ireland now is a thing of the past since brexit. It will basically cost the same again in vat/duty and the 'handling' charges.
-
58 minutes ago, clivegto said:
Don't think the days of smuggling are over yet bud
Unless you wanna spin over on the turbo Clive!
- 1
-
Hi all
As per title. I know about Robinsons Forge, but if I bring in from the UK I'll get hit with a load of Import Duty.
Anywhere in France/Germany/Holland etc?
Thanks in advance
George
-
B6/b12
in Oil Cooled
2 hours ago, wraith said:He likes bandits he got this very very cheap and is getting a stash of parts for it for next winter ISH, he's going to ride it as the 600 for this year maybe some of next, then a b12 motor goes in USD front end etc etc, he only paid £200 for it as a complete bike, as a non runner but it only needed a battery and choke cable.
'kin bargain of the year!!!!!
- 2
-
1 hour ago, Duckndive said:
Steve Conways it runs and rides no show pony
He must have shares in belgom alu so lol. Fair dues to him, but I cant see him risking bringin that out in the rain. youd be 2 weeks cleaning it afterward.
- 1
GSx1100 Dresda Solitaire (I may have had a Clivecident).
in Trick Frames
Posted
Slap in an oil boiler and proper running gear jack the arse of it up a bit and loose that fairing it's too big! And perhaps a turbo! Lol.