-
Posts
876 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Askamaskinservice
-
-
Welcome to OSS.
-
What about a close ratio 5 speed gearbox, would that be any good?
-
Can you post how the ignitionadvance looks on the ignitech.
If you set spark after 2 rev, wouldn't it help reduce kickback, just thinking out loud.(Tell me if i'm wrong)
-
This?
Or this?
https://www.Eblag.com/str/se-spares-ltd/Workshop-Tools/_i.html?_storecat=13940835016
Or.....
-
Solid crash investigation.
-
So done a bit more tonite.
Blue from VR is leadingedge/rising and yellow is trailingedge/falling.
Igniter 32900-48b10 pinout, i know i had it i will insert here when i find it.
-
Headgasket: 11141-00A03 61-68€
Basegasket up to 101424 : 11241-00A02 13.50-15.00€
Basegasket after 101425 : 11241-00A10 12.00-13.00€
Look also what the shipping is, for me the lowest cost shipping is always from Germany, then U.K and last NL.
-
Welcome to OSS.
-
Welcome to OSS.
-
Lovely.
-
-
Hell of a first post. (In the most positive way)
Awsome bike, Welcome to OSS
Winged hammer?
//Hasse.
-
Nice, and a reward beer too.
-
1 hour ago, Blubber said:
Their postage is pretty Royal
For me it is cheaper to get stuff from Germany sent to the Netherlands... Where i live and CMSNL is based.
When I need original stuff I order from https://www.kfm-motorraeder.de/cms/en/genuine-spare-parts/suzuki-spare-parts
You sometime need to use other sites to get the partnumber but that is not a problem.
Thank you so much for a great link.
//Hasse.
- 1
-
Good.
When i read my answer it seems a bit harsh, not my intention.
-
8 hours ago, Brokenbill said:
thanks for the link but 3rd gear is crossed out on their site
So it would be easyer to help if you have an actual partnr.
Is it the same from 95-07?
-
-
This might be '"it"
https://delkevic.co.uk/complete-systems/Suzuki/GSX750E /1983/
Best regards, Hasse.
-
3 hours ago, fatblokeonbandit said:
Are you a salad dodger or skinny bloke..??
Funny lingo, had to think about it for a bit.
-
Have you got any photos of the bike?
You know what they say about a picture.......
The more the merrier.........pictures that is.
-
GT71A = GS1000G S/N 100439
- 1
-
Welcome to OSS.
-
8 hours ago, Hedgehog said:
Had valve cover off, 3 valves are so tight I can't get a feeler gauge under them I've got the shims out 2 of them are 2.60mm and 1 2.50mm I've put the 2.50 in 1 off the 2.60 slots and can get a 5mm feeler gauge so in tolerance, so now looking for 2 more 2.50 shims any suggestions the best suppliers.
I have absolutely no idea what you just wrote, maybe it's just my head....
Robinsonfoundry seems like peoples 1 place to go to.
-
I ordered these a while ago since mine are F****d too.
Havn't got them yet though.
piston ring clearances
in Forced Induction
Posted
Well done.