Blue
-
Posts
668 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Blue
-
-
Oh dear no
-
Sorry Nelson, it's a 5.5" wheel
-
Leak testers are cheap enough on Eblag :tup:
-
6 hours ago, fatblokeonbandit said:
Not necessarily, some welded some not, and some are 0.1mm smaller than others and need knurling..
Yes I found that out too
-
On 29/12/2016 at 8:16 PM, busa ash said:
What are these fittings called & where from? Thanks
-
1
-
-
It's the original arm with R1 brace & adjusters welded on
-
2005 forks on my 86
-
Yeah open to ideas
-
Anyone give me some ideas for a headlight on my shabby fighter? Must be able to see in the dark not 35w, hi/lol too. Or something suitable that I can encase, thanks
-
On 03/12/2016 at 5:17 AM, CockneyRick said:
Lot of parts are interchangeable, but just as many are not! I need a set of engine mounts (6 off) & can't find any over here in UK, so if you wanna part with a set
Why don't you make some?
-
Suffolk
-
I put an EZ wiring loom in my 49 chevy3100, all the wires were black but did have the label written about every 250mm on each wire
-
Ok many thanks all, I do have soldering equipment & a ratchet crimp tool
-
I've moved the battery, Cdi etc to under the tank on my slabby & I shortened some of the wires but it's still a mess & wires are getting squashed between tank & engine. I really need to re-wire it so it's a lot tidier. What size wire should I use & what connectors do you recommend? Some items I won't be able to replace the wire all the way to the component, what's best to do in that situation? Thanks
-
Yep looks pretty tidy
-
Thanks Rotty only just seen this, not been on here for a while
-
Fit any forks & push them up through the yolks. Got gsxr750 k5 in mine
-
Coming along nicely, arm looks good in there
-
Will the unwanted set be for sale?
-
1
-
-
I've sorted that bit out, they're fitted. I just wondered if anyone had done it & what jets etc they had used
-
Anyone fitted water cooled carbs onto an 1100L or similar?
-
Frame number starts JBC
-
Hi Ash, not on this phone & can't dig the bike out at the moment as there's a moggy half finished in the way!
-
Bought this a while back, I can't find out anything about the frame, there's a company on Facebook called Jones customs but it's not them
Carb settings
in Oil Cooled
Posted
What about 750WN carbs for jetting on an 1127?