mikeyd Posted December 31, 2018 Posted December 31, 2018 What about Bandit 1250 throttle bodies and ecu, or is the spacing way off? Quote
Gixer1460 Posted December 31, 2018 Posted December 31, 2018 On 12/19/2018 at 8:33 PM, jensvonbustenskjold said: Ah, sorry, I'm talking about edge, not center. Center is hard to measure with a caliper Why? Edge to edge is the same as centre to centre! 2 Quote
Cheeky4648 Posted December 31, 2018 Posted December 31, 2018 Bandit 1250 throttle bodies are 80-100-80 and 36mm dia. @mikeyd Quote
jensvonbustenskjold Posted January 1, 2019 Author Posted January 1, 2019 (edited) To wrap it up: I purchased a 33 year old bike, dunno what's been done with it since. It's not original. That 's for sure. I've simply taken off the Mikuni's and measured with a caliper. A caliper is not dead on, and center is very hard to measure. That's why I've measured counter edge. The center is measured in AutoCAD later on: I'm adapting my TBs to this spacing, since it's currently fitting carbs. Cheers Edited January 1, 2019 by jensvonbustenskjold 1 Quote
Jonjon Posted January 31, 2021 Posted January 31, 2021 Is this something I can do with my 79 gs1000E ? Quote
Gixer1460 Posted February 1, 2021 Posted February 1, 2021 17 hours ago, Jonjon said: Is this something I can do with my 79 gs1000E ? Anything can fit anything - usually using ingenuity and large hammers ! Plenty of 'old' machinery using EFI! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.