paulszx9 Posted August 26, 2015 Posted August 26, 2015 Hi all Just bought a 600 engine with carbs got it home all Ok so today I decided to take it apart and have a look and one of the mixture screws has no head on it like some one has stripped the end of .so my question is how the f##k can I get it out Quote
fergmc Posted August 26, 2015 Posted August 26, 2015 Not sure I would think careful drilling but it could also be spark eroded although maybe thats a bit drastic. We used to spark erode in my previous employer. Most times im in that fix at home its a careful drill and removal.ferg Quote
gray711 Posted August 26, 2015 Posted August 26, 2015 My usual fix for such a issue is to drill a smallish hole in the offending screw & wack a slightly oversized torx fitting in the hole & gently turn till the bugger unscrews.Granted, mixture screws aren't exactly meaty but if you use a small enough drill bit & torx, job is usually a gooden Quote
fatblokeonbandit Posted August 29, 2015 Posted August 29, 2015 Only time ive been successful doing this was with a small left handed drill...as it cut in it bit and it whizzed out Quote
paulszx9 Posted August 29, 2015 Author Posted August 29, 2015 Unfortunately it didn't work so I'm after a carb for a 600 bandit as long as the mixture screw works Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.