Bandit Sumps on 1127

[Solcambs]

Just a quick check after conversation with Racefit - they have suggested fitting a Bandit 12 sump and pickups to the GSXR1100 engine I am using. Can I check - do all Bandit 12 sumps and pick ups fit all GSXR1100 oil cooled motors? Or is it just say the Mk on the 1052cc motors?

I am looking for a sump and pick ups for my 1100M motor (1127) ... which should I go for? 

[fatblokeonbandit]

Mk1 and mk2 bandit sumps and oil pick ups are the same, i dont know if you need the oil tubes as well for an 1100M, never changed them over, but get the drain pipes as well to be sure,  the left hand one is different on some engines

[colinworth79]

May have to change the oil cooler pipes as well as some gsxr motor had banjo bolt going upwards and not horizontal at the front like a bandit. 

[Solcambs]

So ... after pouring over parts fiches - bandit sump, oil pick up/strainer, and one of the internal tubes appear different (left one sits lower). Just waiting on the pick up/strainer to arrive - then I can decide whether the gasket will suffice or I'll need a new one (Bandit12 or GSXR1100M) 

[Blue]

Got b12 sump on mine but buggered if I can remember what’s changed inside. I think it’s the strainer & oil pick up 

Edited July 22, 2018 by Blue