CockneyRick Posted May 17, 2018 Posted May 17, 2018 Got this off someone on here (forgot as usual) & have ordered an adapter plug (Thanks Dave Dunlop) for the ignition cover lower gallery plug on 1127 lump so i can put a banjo in it. So the question is, will it run as is, or should there be a way to bleed the air from the hose to get it full of oil? Methinks it'll just drain back into the crankcase Quote
colinworth79 Posted May 18, 2018 Posted May 18, 2018 you got it off me . Its a braided steel pressure gauge kit for bandit / gsxr just bolt up and off you go I never bled the air out or anything Quote
wraith Posted May 18, 2018 Posted May 18, 2018 Oil dose drain back to sump, but it only takes 1-2 sec for the oil to get up there, so no need to bleed Quote
CockneyRick Posted May 21, 2018 Author Posted May 21, 2018 @colinworth79 Do u know what the size is of the blue adapter on the gauge? Seems to be M10x1.00 but @gsxr884suggests it's possibly a AN to 3/8 fitting? Quote
colinworth79 Posted May 21, 2018 Posted May 21, 2018 not sure, the hole in the middle is m10x1.00 . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.