inlet stub length

[370steve]

is there any inlet stubs for the oil cooled motor that are shorter (standoff distance) than standard Bandit 12 ones?

are any of the GSXR ones shorter?

I am needing some that are 10mm or more shorter

[Gixer1460]

Never seen any..............the carb linkage and adjustment stuff is close enough to the cam chain tunnel as it is - thinner and would be virtually touching?

[370steve]

from what i have been told GSXR1100 M inlet runners are  "42.2mm bore and 37mm length"  part No 131*0-41C0

i have MK2 bandit rubbers on my motor and they are 50mm long.  part No JCO 34 N1*

are Mk1 bandit rubbers shorter than 50mm?

i need the short inlet rubbers to allow me to fit my TMR's without them hitting the generator !!!

Edited March 15, 2018 by 370steve

[no class]

These were on my mk1 b12 motor..... may actually be gsxr but I am not 100% sure

[370steve]

yep, they are 12mm shotter than my Mk2 bandit rubbers, which might just answer why my TMR's wouldnt fit even if

i shortened the inlet stubs down to their minimum.

i have just ordered some GSXR1100 M/N inlet rubbers which take the 40mm carbs, plus i will get the inlets shortened by 20mm-25mm

this pic made me wonder why TMR's went on to this bike, now i know

Edited March 15, 2018 by 370steve