crow Posted February 6, 2018 Posted February 6, 2018 Morning all Planning to use RS36s on my slabby 11 motor, can anyone confirm the inlet rubber size I need, Google reckons 42mm is this right? Also anyone know what bike I can get the right size rubbers off? Cheers Quote
Gixer1460 Posted February 6, 2018 Posted February 6, 2018 GSXR1100 - K or L will be correct - or anything that used 36mm CV's..........strangely enough! LOL 1 Quote
SiBag Posted February 6, 2018 Posted February 6, 2018 Just measured a set of RS36 and yes the OD of the inlets on the cards are 42mm as you said. As @Gixer1460said K or L should work. 1 Quote
crow Posted February 15, 2018 Author Posted February 15, 2018 OK further question - I've looked at the parts catalogues for various oil boilers with 36mm carbs, it seems inlet rubbers have the same part numbers between B12 and 1100K, but different on 750J... Anyone know what the difference is? Quote
SiBag Posted February 16, 2018 Posted February 16, 2018 J / K 750 models have the DOT head and different inlet angle. This is probably why they are different part numbers. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.