yoke info needed please

[sparki]

afternoon  all,

im wanting to swap the front end of my katana... i have  a complete front end off another bike so need some yoke info please n getting them on... i have another stem i can use without destroying mine, so that can be pressed into something else if needed, but and before i go and get something made... i was hoping someone would know if anything here had their yoke fork centres at 214mm that took a 41mm leg? i see a load of newer usd stuff is 214 spaced but they're all along the lines of 50 odd mm spacing so too big a hole... would like to carry on with clip-ons so a flat top yoke would be ideal too

cheers

[Swiss Toni]

If you're changing the front end     (with what, you don't say), why stay with 41mm stanchions? Most RWU's are 43mm, Z9's are 46! Find a decent, complete front end, and put your spare stem in that. 

[sparki]

i have a complete front end ready to go in  - katana was 37. it came off a bike that was used at a college to learn on so essentially 0 miles... im cheap, thats why its 41

[KATANAMANGLER]

Behold, this may be of help on the fork diameter size at least..

[KATANAMANGLER]

 CBR 600 F3 are 41 too but they come with full cartridge internals and compact nissin 4 pots no idea what the centres are.

[sparki]

thanks all... to be honest it looks like the stuff i have is too entry level with no adjustment other than spring and oil to make a difference... and nothing i could fins used 41 diameter legs with that spacing... i was going to get some yokes made but as i say, the forks themselves are mediocre with no adjustment...

 

i think i need to bite the bullet and buy a complete front end that will bolt in and i can stop fucking around with trying this/that and the next thing... does anyone know if anything will bolt straight into my kat frame? gsxr slingshot i thought were close? b12 with a stem swap and top yoke for clip-ons?... dont need a speedo drive as im going to use koso clocks anyway...