GixxerboiT Posted August 13, 2017 Posted August 13, 2017 I'm new to the furm, but anyway I'm trying to run all led strip turn signals on my 86 gsxr 750 street fighter . I've heavy duty flasher, relays for led or adding lights, led resistor, & I still have no luck any help would be appreciated Quote
Damienga15de Posted August 13, 2017 Posted August 13, 2017 You need to cut the wires off the dash light. Solder 2 diodes onto them and connect the 2 diodes to one side of the dash bulb and ground the other side. Im presuming your issue is everything is flashing together Quote
GixxerboiT Posted August 14, 2017 Author Posted August 14, 2017 Sorry for the long reply, both sides light up individually, there just not flashing at all Quote
Gixer1460 Posted August 14, 2017 Posted August 14, 2017 Back to basics - do regular bulbed indicators work correctly - don't think they do - check. An LED flasher unit will flash both 'normal' and LED lights so thats the first thing to check. Disconnect the dash flasher till the mains are working. Once they are, then do the mod like the Trumpet diagram. Also make sure polarity or lights are correct - LED's won't light if reversed! Quote
suzook12 Posted August 15, 2017 Posted August 15, 2017 Get a proper led flasher relay, saves lots of faffing about Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.