Magoo Posted July 31, 2017 Posted July 31, 2017 Hi all, I'm thinking of shredding my bandit to build a harris. I'd like to know if my JMC bandit swingarm would fit the harris mag4 frame as this would save me a grand on preliminary purchases. Could someone please tell me the width of the gap that the swingarm slots into on the mag4. Cheers. p.s. this is assuming that Harris will still sell me a frame....I haven't contacted them yet. Quote
Dezza Posted July 31, 2017 Posted July 31, 2017 The Harris frame is designed to be used with the Harris swingarm so is unlikely to work that well without it. If you call Harris then they would tell you directly if what you want is possible. Don't bother emailing as they never reply. Quote
FJD Posted July 31, 2017 Posted July 31, 2017 If you are interested, i have an Mag4 swingarm, but not the right frame for it - might be open for a swap or sale. Quote
Magoo Posted July 31, 2017 Author Posted July 31, 2017 I dont supposed you could tell me how wide it is at the pivot, and how far between pivot and spindle, could you please? Quote
FJD Posted August 22, 2017 Posted August 22, 2017 Sorry it took for ages - forgot, then was away for holidays.... The measures are approx: width front: 260mm Length spindle-spindle: 490-540mm width rear inner: 260mm rear axle 25mm frame sindle 20mm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.