homer Posted July 10, 2017 Posted July 10, 2017 (edited) Does anyone have a stock efe? I need to know a dimension from the center of the rear wheel to the inside of the rear sprocket. Need this for the chainline witchcraft Edited July 10, 2017 by homer Quote
Jonny Posted July 15, 2017 Posted July 15, 2017 I have an EFE rear wheel in the shed - I will go and measure it later for you. 1 Quote
CockneyRick Posted July 15, 2017 Posted July 15, 2017 Laser line, or a piece of angle iron from front sprocket to back. How i do it Quote
homer Posted July 15, 2017 Author Posted July 15, 2017 Usually I use that method but I want to compare my new wheel to the stock one. Quote
Jonny Posted July 15, 2017 Posted July 15, 2017 Okay. So from the centre of the wheel to the outside of the sprocket is 90mm and the sprocket is 9mm thick. So 81mm to the inside of the sprocket. Hope that helps. Jonny. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.