Blue Posted July 6, 2017 Posted July 6, 2017 Has anyone fitted the little plastic widgets that keeps the needles straight in their carbs? I'm just wondering if that's why my bike is flooding whilst trying to start it Quote
Oilyspanner Posted July 6, 2017 Posted July 6, 2017 (edited) Needles don't really come into play at starting speeds - plugs (HT leads), float height and pilots are normally the culprits - needles need more revs/vacuum to lift the needles on cv carbs. From your other post at least it's not a coil issue, as it's 1 & 2 that's the problem - worth checking the leads connection to the plug caps Mr Blue, as with all these starting/tick-over type problems it's likely to be a small fault. Probably teaching you to suck eggs, but it's just a case of slowly working through each section that's involved. Edited July 6, 2017 by Oilyspanner 1 Quote
Blue Posted July 6, 2017 Author Posted July 6, 2017 Float valves not closing? Plugs are sparking but getting wet Quote
Oilyspanner Posted July 6, 2017 Posted July 6, 2017 As RichyR says - if the float valves can't close off the fuel you'll get bad running on the affected cylinders (flooding). Even a bit of crud will stop the f.valve from shutting off. The plugs might be shorting due to being fouled. It'll be something small and annoying ! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.