Big-Daddy Posted June 6, 2017 Share Posted June 6, 2017 I got a fork from a 1997 gsxr in my ET but the front wing i dont like from what can i use, looking for a smaller one Quote Link to comment
wraith Posted June 9, 2017 Share Posted June 9, 2017 Have you had a look at the German fighter mud guards? 1 Quote Link to comment
Big-Daddy Posted June 22, 2017 Author Share Posted June 22, 2017 Can i fit a fender from the new gsxrs ?? Quote Link to comment
Jaydee Posted June 22, 2017 Share Posted June 22, 2017 24 minutes ago, Big-Daddy said: Can i fit a fender from the new gsxrs ?? Your forks should have 214mm between centers, newer k series gsxr stuff have 207mm centers so newer mudguard would be a little slimmer sitting in your forks. Usually k series mudguards have twin mounts at the front, but can be mounted with an adapter plate. Personally I wouldn't bother as there's plenty of mudguards to choose from that are a direct fit such as, gsxr 750 L up to last of the srads, gsxr 1100 L to 98, TL1000S/R, early busa, etc. 2 Quote Link to comment
Big-Daddy Posted June 23, 2017 Author Share Posted June 23, 2017 Got one just waiting for the postman . Quote Link to comment
Big-Daddy Posted June 24, 2017 Author Share Posted June 24, 2017 Will post some when im home from work in next week i hope Quote Link to comment
Big-Daddy Posted July 3, 2017 Author Share Posted July 3, 2017 This is the start point Quote Link to comment
Big-Daddy Posted July 3, 2017 Author Share Posted July 3, 2017 And this is where it is now ,want a 5½" rear wheel and a ET head light on it before it get apart for the frame to be fixed and the all the bits go for paint, But does enybody knows how those Gimbel footpegs has to be mounted? 3 Quote Link to comment
Big-Daddy Posted July 10, 2017 Author Share Posted July 10, 2017 Got my Gimbel footrest on and got it running again. but tho old wirring gives me gray hair so hav found a other set of wires. Need a new clutch cabel but can somone help me with from what i can use one ? Quote Link to comment
wraith Posted July 11, 2017 Share Posted July 11, 2017 If you cannot get a gsx one a gs1000/850 mite fit? Same ends. Quote Link to comment
Big-Daddy Posted July 11, 2017 Author Share Posted July 11, 2017 The problem is that the cabel has to bend so it can be there for the headligt Quote Link to comment
yoshi Posted July 11, 2017 Share Posted July 11, 2017 hi bd a 1100 katana cabel might work it has a metal bend at the top of the cabel and the same top and end fitting as the et its about 10mm short than the standard et cabel but with your shorter forks that wont be a problem you should get one ok from wemoto i got the slinky glide cabel for my et they have a bigger core than standard yoshi 1 Quote Link to comment
Big-Daddy Posted July 12, 2017 Author Share Posted July 12, 2017 Thanks for the god advice 1 Quote Link to comment
Big-Daddy Posted July 23, 2017 Author Share Posted July 23, 2017 Does enyone know where to get the trim for the headlight Quote Link to comment
Simbec1863 Posted July 23, 2017 Share Posted July 23, 2017 28 minutes ago, Big-Daddy said: Does enyone know where to get the trim for the headlight Suzuki still do them as well as here https://www.cmsnl.com/suzuki-gsx1100e-1981-x-general-export-e01_model13743/partslist/FIG-24.html#results 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.