Blue Posted April 9, 2017 Posted April 9, 2017 Can anyone tell me what main & pilot jets are fitted as standard? Thanks Quote
bluedog59 Posted April 10, 2017 Posted April 10, 2017 I can tell you the sizes for the WP/ WR (from the factory manual ), 135 min, 35 pilot. Anything else you need while I've got the book out ? Quote
bluedog59 Posted April 10, 2017 Posted April 10, 2017 Mikuni BST38ss. Id number starts 17. If you give me the next 2 digits I can tell you if they are UK. Quote
Madb Posted April 11, 2017 Posted April 11, 2017 main jet on carbs 1&4= 112.5 2&3 carbs=115 pilot jet 35 on all carbs Quote
bluedog59 Posted April 11, 2017 Posted April 11, 2017 Yes you're right on that. I was just checking the book again after reading Blue's post in "Projects" and going to post a correction. OOOOPS. 1 Quote
Madb Posted April 11, 2017 Posted April 11, 2017 no worries. I'm guessing uk spec is wot @blue is after. Quote
Blue Posted April 12, 2017 Author Posted April 12, 2017 Yeah I was hoping I could use the jets in a set of 750L 38's I have but the mains aren't mikuni. I think the pilots would've fitted but they're too big. The caps fit on the top & the choke is different, looks like I need a cable Quote
Madb Posted April 12, 2017 Posted April 12, 2017 i assume you are going to use the standard air box. if you're thinking of pods or soxs then you will need a dyno to set them up. not easy and a bloody good and trusted dyno op is a must. dyno-jet only ever made a stage one kit for the w/c 750's. tho i would use pro-jet kit 3.0 if i were going after market kits. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.