Zepp Posted July 15, 2015 Posted July 15, 2015 (edited) I've got a set of new MTC turbo pistons to fit in my new motor I'm building. They came with Teflon buttons but just read that they will, over time, result in polished sections of liner. The article I'm reading states that Ray Debben had confirmed this. I am am able to get grooves machined in to take circlips. What are your thoughts and better still, your experience in this matter? Edited July 15, 2015 by Zepp Word missing Quote
McLean Racing Posted July 15, 2015 Posted July 15, 2015 Ran buttons in mine for years with no real issues. 2 Quote
Duckndive Posted July 15, 2015 Posted July 15, 2015 I,ve had a no off sets off MTC slugs over the years and even thou i ordered them with buttons they still had circlip grooves in them.......... 1 Quote
uk lee Posted July 15, 2015 Posted July 15, 2015 I ran my oiler on the road with teflon buttons - i never had any issues Lee 1 Quote
Zepp Posted July 15, 2015 Author Posted July 15, 2015 Ok. Cheers. I will go with the Teflon rather than circlips. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.