no class Posted November 9, 2016 Share Posted November 9, 2016 can one of you fine lads give me the thread size and pitch of this part .....please Quote Link to comment
no class Posted November 10, 2016 Author Share Posted November 10, 2016 No one ??? Quote Link to comment
Gammaboy Posted November 10, 2016 Share Posted November 10, 2016 Give them a hint - ie what's it off? Quote Link to comment
no class Posted November 12, 2016 Author Share Posted November 12, 2016 On 2016-11-10 at 5:41 PM, Gammaboy said: Give them a hint - ie what's it off? Its off a slingy frame .... it is that thingy that goes on the pivot shaft for the swingarm . Quote Link to comment
no class Posted November 12, 2016 Author Share Posted November 12, 2016 I am fitting the complete suspension off a k5 gsxr 1000 onto my 83' kat 1100 . I have already widened the frame to accept the 6" wheel while keeping the chain run free and clear of the tire and inner frame rails . The swingarm spindles of the k5 and onwards use a 28x1.5 mm theead . I machined new frame inserts to suit the larger pivot bolt . I want the option of having the 20 mm pivot shaft as well..... funny thing is I have binned quite a few of those locknut thingies over the years and now I could sure use one ! ..... or at least the thread size so I can make one. Quote Link to comment
davecara Posted November 12, 2016 Share Posted November 12, 2016 I think it's M24 but I may be wrong, I've got a Tap in that size as the lovely powdercoaters filled the threads in my frame up and I had to clean them out before I could put the bike together. I'll double check the tap size and post it up later on Quote Link to comment
no class Posted November 12, 2016 Author Share Posted November 12, 2016 Thnx Dave Quote Link to comment
davecara Posted November 12, 2016 Share Posted November 12, 2016 M32x1.5 I get that to Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.